Advanced performance and flexibility

The X64 Xcelera-CL+ PX8 Full is a Camera Link frame grabber that is based on the PCI Express x8 interface. Compatible with a Base, Medium or Full Camera Link® camera, the X64 Xcelera-CL+ PX8 Full supports a wide variety of multi-tap area and line scan colour and monochrome cameras. For greater versatility, the X64 Xcelera-CL+ PX8 Full board can interface with advanced Camera Link camera output formats including 10-taps of 8-bit/pixel or 8-taps of 10-bit/pixel at 85MHz pixel clock rates.

The X64 Xcelera-CL+ PX8 Full has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.

 

Our advantage:Free run-time licensing

The Sapera Essential standard processing tool run-time license is offered at no additional charge when combined with Teledyne DALSA frame grabbers. This software run-time license includes access to image processing functions, area-based (normalized correlation based) template matching tools, blob analysis and lens correction tools.

 

Software support

All of the frame grabbers in the Xcelera series are supported by Teledyne DALSA’s Sapera Vision Software packages:

Teledyne DALSA Platform Development Advantage - Free Run-Time Licensing
The Sapera Essential standard processing tool run-time license is offered at no additional charge when combined with Teledyne DALSA frame grabbers. This software run-time license includes access to image processing functions, area-based (normalized correlation based) template matching tools, blob analysis and lens correction tools.

Sapera Nitrous accelerates Sapera Essential applications by providing a seamless support for graphical processing units (GPU) and multi-core CPUs optimization (MCO).

Sapera Architect Plus gives system integrators and industrial vision automation specialists a user-friendly, non-programming graphical environment to quickly prototype and test drive application specific imaging tools within Sapera Essential and Sapera Nitrous.

 

Specifications

 

Part Number	OR-X8C0-XPF00
Board Type	PCIe
Host Bus	PCIe Gen1 x8
Board Interface	Camera Link
Connectors	Data: 2xSDR CameraLink Controls: 1xCMD15 1x 40-pin shrouded header 1x 4-pin connector for multi-board synchronization
Camera Format	1 x CameraLink Base, Medium, Full or 80-bit
Pixel Clock	20 to 85 MHz
Bits per Pixel	8, 10, 12, 14 and 16-bit/pixel
Number of Camera Taps	1 Tap – 8/10/12/14/16-bit mono 2 Taps – 8/10/12/14/16-bit mono 3 Taps – 8-bit mono; 8/10/12-bit RGB 4 Taps – 8/10/12-bit mono; 14/16-bit mono 8 Taps – 8-bit mono 80-bit mode (DECA): 10 Taps - 8-bit mono 8-Taps - 10-bit mono
GPIO	4-opto in/4-opto out
Camera Control	2 x External Trigger input, Strobe out, Quadrature Encoder, Mulit-board Sync.
Frame Buffer	256 MB
Features	PoCL ILUTs, Dead Pixel, Flat Field, Flat Line, Bayer
Software	Sapera LT SDK, Sapera Vision Software
OS Support	Windows 7 (32-bit), Windows 7 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 10 (32-bit), Windows 10 (64-bit)